Nick Jackson Nick Jackson
0 Cours inscrits • 0 Cours terminéBiographie
正確的なOracle 1z0-1104-25: Oracle Cloud Infrastructure 2025 Security Professional日本語資格取得 -効率的なGoShiken 1z0-1104-25的中問題集
なにごとによらず初手は难しいです、どのようにOracle 1z0-1104-25試験への復習を始めて悩んでいますか。我々のOracle 1z0-1104-25問題集を購買するのはあなたの試験に準備する第一歩です。我々の提供するOracle 1z0-1104-25問題集はあなたの需要に満足できるだけでなく、試験に合格する必要があることです。あなたはまだ躊躇しているなら、GoShikenの1z0-1104-25問題集デモを参考しましょ。
多くの受験生がOracleの1z0-1104-25認定試験に良い成績を取らせるために、GoShikenはより良い結果までずっと努力しています。長年の努力を通じて、GoShikenのOracleの1z0-1104-25認定試験の合格率が１００パーセントになっていました。もしGoShikenのOracleの1z0-1104-25問題集を購入したら、学習教材はどんな問題があれば、或いは試験に不合格になる場合は、全額返金することを保証いたします。
1z0-1104-25的中問題集、1z0-1104-25合格対策
君はまだOracleの1z0-1104-25認証試験を通じての大きい難度が悩んでいますか？ 君はまだOracle 1z0-1104-25認証試験に合格するために寝食を忘れて頑張って復習しますか？ 早くてOracle 1z0-1104-25認証試験を通りたいですか？GoShikenを選択しましょう！GoShikenはきみのIT夢に向かって力になりますよ。GoShikenは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。
Oracle Cloud Infrastructure 2025 Security Professional 認定 1z0-1104-25 試験問題 (Q25-Q30):
質問 # 25
Task 6: Create Load Balancer and Attach Certificate
Create a Load Balancer with the name PBT-CERT-LB-01 in subnet LB-Subnet-PBT-CERT-SNET-02 Create a Listener for the load balancer, where:
Name: PBT-CERT-LB_LTSN_01
Protocol: HTTPS
Port: 443
Attach the certificate PBT-CERT-01-<username> to the load balancer
Attach the security list PBT-CERT-LB-SL-01 to subnet LB-Subnet-PBT-CERT-SNET-02 See the solution below in Explanation.
正解：
解説：
Task 6: Create Load Balancer and Attach Certificate
Step 1: Create the Load Balancer
* Log in to the OCI Console.
* Navigate toNetworking>Load Balancers.
* ClickCreate Load Balancer.
* Enter the following details:
* Name: PBT-CERT-LB-01
* Compartment: Select your assigned compartment.
* Load Balancer Type: SelectPublic.
* Virtual Cloud Network: Select PBT-CERT-VCN-01.
* Subnet: Select LB-Subnet-PBT-CERT-SNET-02.
* Shape: Choose a shape (e.g., 10 Mbps, adjust based on needs).
* ClickNext.
* Leave backend sets and listeners as default for now (we'll configure the listener next).
* ClickCreate Load Balancerand wait for it to be provisioned.
Step 2: Create a Listener
* Once the load balancer is created, go to theLoad Balancerspage and click on PBT-CERT-LB-01.
* UnderResources, clickListeners.
* ClickCreate Listener.
* Enter the following details:
* Name: PBT-CERT-LB_LTSN_01
* Protocol: SelectHTTPS.
* Port: Enter 443.
* Certificate: ClickAdd Certificate, then select the PBT-CERT-01<username> certificate (e.g., PBT-CERT-0199008677labuser01) created in Task 5.
* Leave other settings (e.g., SSL handling) as default unless specified.
* ClickCreate.
Step 3: Configure the Backend Set
* In the PBT-CERT-LB-01 details page, underResources, clickBackend Sets.
* ClickCreate Backend Set(if not already created).
* Enter basic details (e.g., name like PBT-CERT-BS-01).
* Add a backend server:
* IP Address: Use the private IP of PBT-CERT-VM-01 (find this in the instance details under Compute>Instances).
* Port: 80 (HTTP, as configured on the web server).
* Protocol: HTTP.
* ClickCreate.
Step 4: Attach the Security List to the Subnet
* Navigate toNetworking>Virtual Cloud Networks.
* Select PBT-CERT-VCN-01 and clickSubnets.
* Click on LB-Subnet-PBT-CERT-SNET-02.
* UnderSecurity Lists, ensure PBT-CERT-LB-SL-01 is attached. If not:
* ClickEdit.
* Remove the default security list and add PBT-CERT-LB-SL-01.
* ClickSave Changes.
Step 5: Verify the Configuration
* Ensure the load balancer health status is OK (check underBackend Sets>Health).
* Test by accessing https://<load-balancer-public-ip> in a browser (replace with the public IP from the load balancer details).
質問 # 26
Task 3: Create a Master Encryption Key
Note: OCI Vault to store the key required by this task is created in the root compartment as PBI_Vault_SP Create an RSA Master Encryption Key (MEK), where:
Key name: PBT-CERT-MEK-01-<username>
For example, if your username is 99008677-lab.user01, then the MEK name should be PBT-CERT-MEK-
01990086771abuser01
Ensure you eliminate special characters from the user name.
Key shape: 4096 bits
Enter the OCID of the Master Encryption Key created in the provided text box:
正解：
解説：
See the solution below in Explanation.
Explanation:
Task 3: Create a Master Encryption Key
Step 1: Access the OCI Vault
* Log in to the OCI Console.
* Navigate toIdentity & Security>Vault.
* Select the root compartment.
* Locate and click on the vault named PBI_Vault_SP.
Step 2: Create the Master Encryption Key
* In the PBI_Vault_SP vault details page, underResources, clickKeys.
* ClickCreate Key.
* Enter the following details:
* Name: Replace <username> with your username (e.g., if your username is 99008677-lab.user01, remove special characters like - and . to get 99008677labuser01, then use PBT-CERT-MEK-
0199008677labuser01).
* Key Shape: SelectRSAwith4096 bits.
* Protection Mode: SelectHSM(Hardware Security Module) if available, orSoftwareif HSM is not required (based on vault capabilities).
* Compartment: Ensure it's set to the root compartment (where PBI_Vault_SP resides).
* Leave other settings (e.g., key usage) as default unless specified.
* ClickCreate Keyand wait for the key to be generated.
Step 3: Retrieve and Enter the OCID
* After the key is created, go to theKeyssection under PBI_Vault_SP.
* Click on the key named PBT-CERT-MEK-01<username> (e.g., PBT-CERT-MEK-
0199008677labuser01).
* Copy theOCID(a long string starting with ocid1.key., unique to your tenancy) from the key details page.
* Enter the copied OCID exactly as it appears into the provided text box.
質問 # 27
Challenge 1 - Task 1
Integrate TLS Certificate Issued by the OCI Certificates Service with Load Balancer You are a cloud engineer at a tech company that is migrating its services to Oracle Cloud Infrastructure (OCI). You are required to set up secure communication for your web application using OCI's Certificate service. You need to create a Certificate Authority (CA), issue a TLS/SSL server certificate, and configure a load balancer to use this certificate to ensure encrypted traffic between clients and the backend servers.
Review the architecture diagram, which outlines the resources you'll need to address the requirement.
Preconfigured
To complete this requirement, you are provided with the following:
Access to an OCI tenancy, an assigned compartment, and OCI credentials
Required IAM policies
OCI Vault to store the secret required by the program, which is created in the root compartment as PBI_Vault_SP Task 1: Create and Configure a Virtual Cloud Network (VCN) Create a Virtual Cloud Network (VCN) namedPBT-CERT-VCN-01with the following specifications:
* VCN with a CIDR block of 10.0.0.0/16
* Subnet 1 (Compute Instance):
* Name:Compute-Subnet-PBT-CERT
* CIDR Block:10.0.1.0/24
Subnet 2 (Load Balancer):
* Name:LB-Subnet-PBT-CERT-SNET-02
* CIDR Block:10.0.2.0/24
Internet Gatewayfor external connectivity
Route table and security lists:
* Security List namedPBT-CERT-CS-SL-01for Subnet 1 (Compute-Subnet-PBT-CERT) to allow SSH (port 22) traffic
* Security List namedPBT-CERT-LB-SL-01for Subnet 2 (LB-Subnet-PBT-CERT) to allow HTTPS (port 443) traffic
"Enter the OCID of the created VCN in the text box below.
正解：
解説：
See the solution below in Explanation.
Explanation:
Challenge 1: Integrate TLS Certificate Issued by the OCI Certificates Service with Load Balancer Task 1: Create and Configure a Virtual Cloud Network (VCN) Step 1: Create the Virtual Cloud Network (VCN)
* Log in to the OCI Console.
* Navigate toNetworking>Virtual Cloud Networks.
* ClickCreate Virtual Cloud Network.
* SelectVCN with Internet Connectivity(to include an Internet Gateway by default).
* Enter the following details:
* Name: PBT-CERT-VCN-01
* Compartment: Select your assigned compartment.
* VCN CIDR Block: 10.0.0.0/16
* Leave other settings as default (e.g., create a new public subnet and route table).
* ClickCreate Virtual Cloud Network. Wait for the VCN to be created.
Step 2: Create Subnet 1 (Compute-Subnet-PBT-CERT)
* In the VCN details page for PBT-CERT-VCN-01, clickSubnetsunderResources.
* ClickCreate Subnet.
* Enter the following details:
* Name: Compute-Subnet-PBT-CERT
* Subnet Type: Regional
* CIDR Block: 10.0.1.0/24
* Route Table: Select the default route table created with the VCN.
* Subnet Access: Public Subnet (to allow internet access).
* DNS Resolution: Enabled.
* ClickCreate.
Step 3: Create Subnet 2 (LB-Subnet-PBT-CERT-SNET-02)
* In the VCN details page, clickSubnetsunderResources.
* ClickCreate Subnet.
* Enter the following details:
* Name: LB-Subnet-PBT-CERT-SNET-02
* Subnet Type: Regional
* CIDR Block: 10.0.2.0/24
* Route Table: Select the default route table created with the VCN.
* Subnet Access: Public Subnet (to allow internet access for the load balancer).
* DNS Resolution: Enabled.
* ClickCreate.
Step 4: Verify Internet Gateway
* In the VCN details page, underResources, clickInternet Gateways.
* Ensure an Internet Gateway is listed and attached to PBT-CERT-VCN-01. If not created, clickCreate Internet Gateway, name it (e.g., PBT-CERT-IGW), and attach it.
Step 5: Configure Route Table
* In the VCN details page, underResources, clickRoute Tables.
* Select the default route table or create a new one named PBT-CERT-RT-01.
* ClickAdd Route Rule. 4 -Destination CIDR Block: 0.0.0.0/0
* Target Type: Internet Gateway
* Target: Select the Internet Gateway created (e.g., PBT-CERT-IGW).
* ClickAdd Route Ruleand save.
Step 6: Create Security List for Subnet 1 (Compute-Subnet-PBT-CERT)
* In the VCN details page, underResources, clickSecurity Lists.
* ClickCreate Security List.
* Enter the following:
* Name: PBT-CERT-CS-SL-01
* Compartment: Your assigned compartment.
* Add the following ingress rule:
* Source CIDR: 0.0.0.0/0 (allow from any source, adjust as per security needs)
* IP Protocol: TCP
* Source Port Range: All
* Destination Port Range: 22 (for SSH)
* Allows: Traffic
* ClickCreate.
Step 7: Create Security List for Subnet 2 (LB-Subnet-PBT-CERT-SNET-02)
* In the VCN details page, underResources, clickSecurity Lists.
* ClickCreate Security List.
* Enter the following:
* Name: PBT-CERT-LB-SL-01
* Compartment: Your assigned compartment.
* Add the following ingress rule:
* Source CIDR: 0.0.0.0/0 (allow from any source, adjust as per security needs)
* IP Protocol: TCP
* Source Port Range: All
* Destination Port Range: 443 (for HTTPS)
* Allows: Traffic
* ClickCreate.
Step 8: Retrieve and Enter VCN OCID
* Go to the VCN details page for PBT-CERT-VCN-01.
* Copy theOCIDfrom the VCN information section.
* Enter the OCID in the provided text box.
質問 # 28
Task 4: Create a Certificate Authority (CA)
Create a certificate authority, where:
CA name: PBT-CERT-CA-01-<username>
For example, if your username is 99008677-lab.user01, then the certificate authority name should be PBT- CERT-CA-01990086771abuser01 Ensure you eliminate special characters from the user name.
Common name: PBT-CERT-OCICA-01
Master Encryption Key: PBT-CERT-MEK-01 (created in the previous task)
正解：
解説：
See the solution below in Explanation.
Task 4: Create a Certificate Authority (CA)
Step 1: Access the OCI Vault
* Log in to the OCI Console.
* Navigate toIdentity & Security>Vault.
* Select the root compartment.
* Locate and click on the vault named PBI_Vault_SP.
Step 2: Create the Certificate Authority
* In the PBI_Vault_SP vault details page, underResources, clickCertificate Authorities.
* ClickCreate Certificate Authority.
* Enter the following details:
* Name: Replace <username> with your username (e.g., if your username is 99008677-lab.user01, remove special characters like - and . to get 99008677labuser01, then use PBT-CERT-CA-
0199008677labuser01).
* Common Name: Enter PBT-CERT-OCICA-01.
* Master Encryption Key: Select the PBT-CERT-MEK-01<username> key created in Task 3 (e.
g., PBT-CERT-MEK-0199008677labuser01).
* Subject: Leave as default or adjust (e.g., Organization, Country) if required by your setup.
* Validity Period: Set as needed (e.g., 10 years), or use the default.
* Compartment: Ensure it's set to the root compartment.
* ClickCreate Certificate Authorityand wait for the CA to be provisioned.
Step 3: Verify the Certificate Authority
* After creation, go to theCertificate Authoritiessection under PBI_Vault_SP.
* Confirm the CA PBT-CERT-CA-01<username> (e.g., PBT-CERT-CA-0199008677labuser01) is listed and its status is active.
質問 # 29
"Your company is in the process of migrating its sensitive data to Oracle Cloud Infrastructure (OCI) and is prioritizing the strongest possible security measures. Encryption is a key part of this strategy, but you are particularly concerned about the physical security of the hardware where your encryption keys will be stored.
Which characteristic of OCI Key Management Service (KMS) helps ensure the physical security of your encryption keys?
- A. Seamless integration with other OCI services for streamlined workflows
- B. Utilization of FIPS 140-2 validated Hardware Security Modules (HSMs)"
- C. Granular customer control over key access permissions
- D. Centralized key management for simplified administration
正解：B
質問 # 30
......
最もリラックスした状態ですべての苦難に直面しています。Oracleの1z0-1104-25「Oracle Cloud Infrastructure 2025 Security Professional」試験はとても難しいですが、受験生の皆がリラックスした状態で試験を受けるべきです。。GoShikenのOracleの1z0-1104-25試験トレーニング資料は私達を助けられます。GoShikenがそばにいてくれると、恐くなくなり、迷わなくなります。GoShikenのOracleの1z0-1104-25試験トレーニング資料は私達受験生の最良の選択です。
1z0-1104-25的中問題集: https://www.goshiken.com/Oracle/1z0-1104-25-mondaishu.html
GoShikenが提供したOracleの1z0-1104-25の試験トレーニング資料はベストセラーになって、ずっとピアの皆をリードしています、我々はこの一年あなたの持っている1z0-1104-25問題集がずっと最新版のを保証します、1z0-1104-25学習資料のような適合なアプローチと高品質の製品なしで、どのように勉強しても勉強しても、試験準備にどれだけ時間を費やしても、試験に簡単に合格することはありません、Oracle 1z0-1104-25的中問題集 pdfを勉強するための3つのモードがあります、それは、最も効果的で正確な1z0-1104-25練習テストの設計に専念している専門家のグループを成立した理由です、お客様のサポートがなければ、私たちの1z0-1104-25的中問題集 - Oracle Cloud Infrastructure 2025 Security Professional試験合格対策は、市場で大きな成功を収められませんでした。
きっとこのショッピングモールは経費をそう気にしなくてもいいくらいには儲1z0-1104-25けているのだろう、可愛い恋人を恥だなんて、酷い言い様だこと おまえなあ 言葉尻をとらえての意図的な毒を、兎場さんがげんなりとしたため息に変える。
完璧1z0-1104-25｜効率的な1z0-1104-25日本語資格取得試験｜試験の準備方法Oracle Cloud Infrastructure 2025 Security Professional的中問題集
GoShikenが提供したOracleの1z0-1104-25の試験トレーニング資料はベストセラーになって、ずっとピアの皆をリードしています、我々はこの一年あなたの持っている1z0-1104-25問題集がずっと最新版のを保証します、1z0-1104-25学習資料のような適合なアプローチと高品質の製品なしで、どのように勉強しても勉強しても、試験準備にどれだけ時間を費やしても、試験に簡単に合格することはありません。
Oracle pdfを勉強するための3つのモードがあります、それは、最も効果的で正確な1z0-1104-25練習テストの設計に専念している専門家のグループを成立した理由です。
- 1z0-1104-25関連日本語版問題集 🤺 1z0-1104-25ソフトウエア 👄 1z0-1104-25勉強ガイド 🤽 ➽ 1z0-1104-25 🢪を無料でダウンロード⇛ www.jpshiken.com ⇚で検索するだけ1z0-1104-25認定資格
- 1z0-1104-25受験トレーリング 😙 1z0-1104-25最速合格 🔙 1z0-1104-25 PDF問題サンプル ⏮ 今すぐ✔ www.goshiken.com ️✔️で▛ 1z0-1104-25 ▟を検索して、無料でダウンロードしてください1z0-1104-25勉強ガイド
- 1z0-1104-25日本語対策問題集 💆 1z0-1104-25合格体験記 🟫 1z0-1104-25資格取得 🧟 URL ✔ www.passtest.jp ️✔️をコピーして開き、（ 1z0-1104-25 ）を検索して無料でダウンロードしてください1z0-1104-25最速合格
- 1z0-1104-25トレーニング 🐉 1z0-1104-25受験トレーリング 🍅 1z0-1104-25最速合格 🦮 ✔ 1z0-1104-25 ️✔️を無料でダウンロード（ www.goshiken.com ）ウェブサイトを入力するだけ1z0-1104-25トレーニング
- 1z0-1104-25認証試験 📇 1z0-1104-25受験トレーリング 🥈 1z0-1104-25最速合格 🦱 ▛ www.jpexam.com ▟で➽ 1z0-1104-25 🢪を検索して、無料でダウンロードしてください1z0-1104-25認証試験
- 1z0-1104-25日本語資格取得｜Oracle Cloud Infrastructure 2025 Security Professionalに有効 🔯 今すぐ{ www.goshiken.com }を開き、▷ 1z0-1104-25 ◁を検索して無料でダウンロードしてください1z0-1104-25勉強ガイド
- 正確な1z0-1104-25日本語資格取得 - www.jpexam.com内の全て 🔹 ➽ www.jpexam.com 🢪から簡単に「 1z0-1104-25 」を無料でダウンロードできます1z0-1104-25関連日本語版問題集
- 1z0-1104-25日本語解説集 😷 1z0-1104-25受験トレーリング 🕌 1z0-1104-25トレーリング学習 ⛑ サイト✔ www.goshiken.com ️✔️で▶ 1z0-1104-25 ◀問題集をダウンロード1z0-1104-25合格体験記
- 1z0-1104-25日本語資格取得｜Oracle Cloud Infrastructure 2025 Security Professionalに有効 🤰 ➽ www.it-passports.com 🢪を開いて⇛ 1z0-1104-25 ⇚を検索し、試験資料を無料でダウンロードしてください1z0-1104-25最速合格
- 1z0-1104-25日本語認定対策 💚 1z0-1104-25日本語解説集 🤰 1z0-1104-25ソフトウエア 🆎 ⏩ www.goshiken.com ⏪を開いて➠ 1z0-1104-25 🠰を検索し、試験資料を無料でダウンロードしてください1z0-1104-25日本語解説集
- 1z0-1104-25復習資料 🌳 1z0-1104-25合格体験記 ⬅️ 1z0-1104-25 PDF問題サンプル 🕢 最新《 1z0-1104-25 》問題集ファイルは{ www.it-passports.com }にて検索1z0-1104-25勉強ガイド
- lms.ait.edu.za, lmsducat.soinfotech.com, global.edu.bd, uniway.edu.lk, pct.edu.pk, tacservices.co.ke, ar.montazer.co, cou.alnoor.edu.iq, motionentrance.edu.np, amiktomakakamajene.ac.id